© Copyright Turning Technologies

Original 3-path control based on Fanuc 16iTB enables machine capability to be maximized and efficient machine control is realized.Multi-Tasking 11-axis Machine with simultaneous 5+4+2-axis control.

Super Multi-Tasking Operation

Tool spindle with B and Y axes, twin-spindle, twin-turret lathe with ATC, simultaneous turning and machining become possible. The tool spindle is available to work on both L/R spindles. At the same time, continuous machining through the use of lower turret during ATC cycle allows drastic improvement of productivity.

Super Multi-Tasking Twin-Spindle Turning Centre Super NTX

t: 01926 818 444 | e: sales@turning.biz

Rotating tool spindle with ATC

B-axis positioning range +/-115 degrees, Y-axis stroke +/-80mm for wide range of machining.Highly efficient production is possible by 8000rpm, 15HP high-speed, high-output motor mounted on the tool spindle. Thanks to independent self-supported tool magazine and change arm,loss of machining accuracy due to inertia effect and vibration caused by ATC operation is prevented.By preparing next tool during machining, time for tool change is 1.5 seconds (tool to tool).

Various Machining Methods

*4-axis turning on one spindle while machining on the other spindle.

*Method Three
Continuous machining through the use of lower turret during upper tool change cycle.

*Method Four
Using lower turret to support the part while machining with the upper turret. At the same time, machining on the second spindle continues.